【Features】
1. Use aviation aluminum, CNC precision processing, hard anode oxidation on the surface, solid split design, all the configuration of stainless steel camera screws, increase the left vertical panel screw holes and hot and hot boots.
2. Lightweight hollow design, net weight: 140g of hot boots, 150g with hot boots; 1/4 screws of the fixed camera can be tightened with coins, and there are anti -proof insurance screws on the opposite side.
3. Tailoring for the Canon EOSR5/R6 body. After installing the camera on the camera, it does not affect the data compartment door opening and the shutter line and the microphone line. The bottom is reserved with 1/4 screw holes and strap holes.
4. Using 39mm standard AS interface, in addition to supporting IS-QJ64/JZ50 and IS-QJ58 Metro compatible with RRS/Arca-Swiss/Kirk/Wimberley/Markins/Sunwayfoto NGRINPOCHE/BENRO/Sirui, etc.
5. Product parameters: length 148mm*width 38/70mm*height 88mm
【Applicable Model】Canon EOS-R5/R6 micro-single body dedicated
【Physical Picture-Bringing Hot and Hot Boots】【Physical picture】